聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

Optically clear simultaneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. I. Preparation and characterization

Poly(ethylene glycol) diacrylate was synthesized from poly(ethylene glycol) of molecular weight 600 with acryloyl chloride in a molar ratio of 1:2. Poly(ethylene glycol) diacrylate (PEGDA) was then blended with diglycidyl ether of bisphenol A (DGEBA) in various ratios, followed by curing with 2,2′-azobisisobutyronitrile (AIBN) and isophronediamine (IPDA) simultaneously. Viscosity changes before and during IPN formation were examined with a Brookfield viscometer. Formation of H-bonding and functional group changes were investigated with FTIR. Exothermic curing thermograms were recorded with dynamic DSC. Optically clear IPNs thus obtained were characterized with rheometric dynamic spectroscopy (RDS) and scanning electron microscopy (SEM) to check possible compatibility of the two networks. Experimental results revealed that during IPN formation hydrogen bonds between PEGDA and DGEBA and interlock of networks had profound effect on viscosity change and pot-life. Complete compatibility of the IPNs was found as DGEBA content was higher than 50% by weight. The compatibility between PEGDA and DGEBA networks was evidenced from inner shift of a single damping peak in RDS. In the meantime, SEM micrographs confirmed the coincidence with the result of RDS © 1992 John Wiley &Sons, Inc.     

高密度燃料HDF-1与橡胶的相容性研究

报道了在室温和70 ℃下橡胶材料G402氟硅胶、丁腈胶5171、丁腈胶4170、贮囊橡胶用合成的高密度燃料HDF-1浸泡后性能如伸长率、邵尔硬度、重量、面积体积的变化，并与采用3号喷气燃料（RP-3）实验结果进行对照。用红外光谱测定了燃料浸泡前后橡胶组成的变化。实验结果表明，G402氟硅胶和贮囊对于HDF-1和RP-3有相近的相容性，丁腈胶5171对HDF-1的相容性比对RP-3的相容性稍差，丁腈胶4170对HDF-1的相容性比对RP-3的相容性更差的结果。因此，丁腈胶5171和丁腈胶4170不能用于HDF-1储存和输送，原使用RP-3系统的橡胶密封件不能直接使用HDF-1。     

Thermoanalytical study of glibenclamide and excipients

Summary Taking into account the problems of desertification and agricultural practices able to provide income to the population at the semi-arid region of North-East Brazil, this work presents the results of the chemical and thermal characterization by TG and DSC of the seed derivatives of Cnidoscolus quercifolius, hereinafter called faveleira, aiming at the application of these materials as an alternative of food source for animals and for the human population at this region. The faveleira seed derivatives present thermodynamic properties similar to the ones of other foods utilized for human use, as well as an acceptable calorific value. According to TG and DSC results, was verified that the faveleira derivatives presents good thermal and oxidative stabilities.     

Compatibility and stability tests of risperidone with soft-drinks by isothermal titration microcalorimetry

Isothermal titration microcalorimetry has been applied to investigate the compatibility testing of risperidone oral solution with soft-drinks and the interaction with tea tannin such as (–)-epigallocatechin, (–)-epicatechin, theaflavin and their gallates. In aqueous solution, risperidone was exothermically bound to tea tannin with binding affinity (10³–10⁴ M^–1), small enthalpy and entropy changes reflecting van der Waal’s interaction to form an insoluble complex at 1:1 molar ratio. The heat effect of risperidone titrated into soft-drinks containing tannin was exothermic and proportional to the quantity of the complex. While, no significant heat effect was found for risperidone titrated into a pet-bottled water and an infusion of parched barley without tea tannin. These results were agreed with stability testing of risperidone in some soft-drinks by HPLC method.     

共混合聚(醚-酯)多嵌段共聚物的表面表征及其血液相容性研究

本文通过X-射线光电子能谱(XPS)、表面接触角、表面ξ电位和血液相容性实验,研究了聚(醚-酯)多嵌段共聚物及其共混物的表面组成和性质与血液相容性的关系。实验结果表明,疏水性的PET-PTMO多嵌段共聚物的血液相容性很差,并且与表相中软段的富集量无关;当亲水性的PET-PEO多嵌段共聚物与疏水性的PET-PTMO多嵌段共聚物共混后,发现存在着一个最佳的共混比例,此时材料表面的血小板粘附量大大降低。对于共混物,表相△[C—O)/[C—O]和表面ξ电位可以较好地与血小板粘附量相关联。以上结果清楚地表明,材料表面的亲-疏水性平衡、软段深度层次分布及表面电位是影响血液相容性的重要因素。     

Studies on alkaline protease produced by Bacillus sp. NG312

An alkalophilic hyperproducer of alkaline protease, Bacillus sp. NG312, was isolated, and the enzyme showed maximum activity at pH 11.0 and 60°C. The temperature optimum was increased by 10°C in presence of Ca²⁺. The crudeenzyme was found to have half-life of 11 d at 37°C and maximum stability at pH 9.0–10.0. It also exhibited very good stability in presence of detergent components and some locally available commericial detergent powders.     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

聚氯乙烯／线性低密度聚乙烯共混体系的相容性

用动态力学分析（ＤＭＡ）和傅利叶变换红外光谱（ＦＴＩＲ）研究了氢化聚丁二烯－ｂ－聚甲基丙烯酸甲酯（ＨＰＢＤ－ｂ－ＰＭＭＡ）共聚物增容剂对聚氯乙烯（ＰＶＣ）与线性低密度聚乙烯（ＬＬＤＰＥ）共混体系的增容作用．增容剂使共混物中两相的玻璃化温度发生变化，说明其相容性增加．ＦＴＩＲ的结果表明，增容剂中羰基与ＰＶＣ的α氢形成氢键，使ＣＯ，Ｈ─Ｃ及Ｃ─Ｃｌ的振动频率变化，峰形加宽．